PERFECT MULTI PRIMER

Features

• Excellent penetration into porous substrates 

• Enhances adhesion and improves performance of waterproofing membranes 

• Water-based and environmentally friendly 

• Easy to apply with a brush or roller 

• Improves workability and reduces surface irregularities 

Uses

       As a Primer for Waterproofing Works  

• Apply the primer undiluted using a brush or roller. 

• Allow the primer to fully cure before applying the subsequent waterproofing membrane. 
  
  As a Primer for Tiling Works 

• Dilute the primer with clean water at a ratio of 2:1 (Water : Primer) before application. 

• Apply the diluted primer evenly using a brush or roller. 

• Once the primer has completely dried, proceed with tile installation.
  
  As a Primer for Self-levelling Mortar Works 

• Apply the primer in two coats prior to the application of the self-levelling mortar. 

• 1st Coat Dilution Ratio: Water : Primer = 1.5 : 1 

• 2nd Coat Dilution Ratio: Water : Primer = 0.5 : 1 

• Apply evenly using a roller or brush to avoid ponding. 

• Allow the primer to dry completely and ensure a tack-free surface before pouring the self-levelling mortar. 

• Ensure the substrate is non-absorbent or highly absorbent areas are fully sealed to prevent rapid moisture loss. 

Specifiations

*Depends on temperature, humidity, surface porosity, etc. 

**Under generally accepted hygrothermal conditions 

Suitable Tile Types

• Concrete 

• Mortar beds / Screeds 

• Masonry surfaces 

• Rendered surfaces 

• General floor and wall surfaces prior to waterproofing and tiling 

• Interior and exterior use where suitable